Tag Archives: mixer

Don’t Use EQ Spectrum Analyzers, Use Your Ears

There’s an issue that people who’ve started making music the past 10 years or so think an audio spectrum / waveform = what you hear. The sad fact is that it doesn’t.

One thing I’ve found that seemed to be a key to “professional” audio mixing / mastering people is that they had some kind of experience with real, studio mixers. They didn’t have access to spectrum windows, they mastered by tweaking dynamics knobs and using their ears. They didn’t have techy BS of calling out kHz or Hz numbers like “4,200”, “31.5” or other crap relating to decibel ranges like people using computer software so frequently do. This is because…

Continue reading Don’t Use EQ Spectrum Analyzers, Use Your Ears

How To Reuse / Reapply Mixer Console (Artist) Tape Scribble Strips

I’ve created a method to reuse mixer console (artist) tape for cheap ($6 or so) and anyone can do it. It involves using three things; console / artist tape, printer paper and Elmer’s “Tac ‘N Stik” (or a competing brand, white preferably). I also have a system for managing the strips, focused on music producing. This method is much more preferable as, when switching between songs, you can stack the scribble strips without having to worry about them getting stuck together, ruined, losing their adhesiveness or simply making your area look tacky with scribble strips stuck everywhere.

Cut paper into strips

We’re going to use the paper as an inner-material for the strips. A paper’s 8.5″ width is nearly perfect for eight channels. Take a pen and make little notch marks along the length (height) of the paper that matches the size of the console tape. Then, cut the paper into strips.

Continue reading How To Reuse / Reapply Mixer Console (Artist) Tape Scribble Strips

Reason: Using A BCR2000 To Fully Control The SSL Mixer’s EQ Channel Strip

[05/10/2020 Version 1.5] I’ve created a way to fully control the entire Reason virtual SSL mixer and (most challenging), select and change mixer channels directly from only one BCR2000. I searched for months and found no one’s accomplished this. I’m sharing this specific method, along with a custom hardware profile (known as remotemap’s), and custom overlay graphics. I’ve also included some tweaks to the BCF2000 that add functionality.

Before creating this method, it wasn’t possible to control the individual channel settings of Propellerhead Reason’s virtual SSL mixer with a BCR2000. Before understanding how to do this, it’s important to understand why so many forum posts, videos and other information regarding Behringer BCR2000 and BCF2000’s are well-meaning but wrong when it comes to Reason. Instead of dumping files online and making people figure it out for themselves, I’m gonna’ explain this situation as no one else has.

Continue reading Reason: Using A BCR2000 To Fully Control The SSL Mixer’s EQ Channel Strip

Reason: I Have A Lot Of Respect For The 14:2 Mixer (reMIX)

One thing putting together a physical mixer console has taught me is how capable Reason’s original virtual rack-mounted 14 stereo channel (28 mono channel) mixer, known as the reMIX Virtual Tec MX 28-4-14, was / is. The reMIX has since been replaced by the virtual SSL 9000k mixing console and it, of course, blows the reMIX out of the water in terms of functionality.

But one thing it taught was the power of using what you have wisely. The reason is because you were limited to 14 channels (even if you were using a mono source, such as a subtractor, you still wanted to apply FXs, EQ or panning from the reMIX, which made you use up an entire channel strip). Of course, you could chain multiple reMIXes together without taking up a channel slot (as well as passing on the 4 FX’s to each mixer). But it still taught you a valuable lesson of doing more with less.

Continue reading Reason: I Have A Lot Of Respect For The 14:2 Mixer (reMIX)