Tag Archives: PB-64

Customizing The Music Studio Furniture & Hardware

A lot of updates have been happening to my music studio setup. Hardware’s been rearranged and devices have changed. One of the things I haven’t covered yet here is how I built my studio desk. So in this article, I’ll be talking about how I set the desk up, installed or removed music studio hardware and keep everything working together.

New audio interface, the FCA1616

I wrote before about replacing my M-Audio Oxygen49 with a Roland A-49. The original audio interface, the Tascam US-322, that used to sit to the right side of the keyboard.

Continue reading Customizing The Music Studio Furniture & Hardware

How To Install Half Rack Studio Devices In A Full Rack

Here’s a guide on how to install half-rack (compact) studio devices the right way (so that two half-rack devices can be installed side-by-side). The bad news is that no one sells any products where you can just mount your half-rack device and install it into your full-sized (normal) rack. The good news is that I was able to modify a $20-$30 rack shelf and I’m gonna’ show you how I did it…

Foreword

What I did was do a major modification to a rack shelf with a lip on the front. This is the rack shelf I got.

Continue reading How To Install Half Rack Studio Devices In A Full Rack

How To Paint Your Own Audio Patch Cables

After creating my own audio patch cable experiment proved unreliable, I ordered some normal, boring looking 1′ (0.3m) black with red and white tipped RCA cables. But I still wanted the cables to have a distinctive look to them. So I decided to paint them. Supplying your own cables, it’ll cost you less than $10 to do it yourself too…

Materials needed

Spray paint. I highly recommend Krylon “Fusion For Plastic” (what I simply call Krylon Fusion). You don’t need any sanding or spray painting primer or none of that stupid mess.

Continue reading How To Paint Your Own Audio Patch Cables