Tag Archives: M-Audio

Customizing The Music Studio Furniture & Hardware

A lot of updates have been happening to my music studio setup. Hardware’s been rearranged and devices have changed. One of the things I haven’t covered yet here is how I built my studio desk. So in this article, I’ll be talking about how I set the desk up, installed or removed music studio hardware and keep everything working together.

New audio interface, the FCA1616

I wrote before about replacing my M-Audio Oxygen49 with a Roland A-49. The original audio interface, the Tascam US-322, that used to sit to the right side of the keyboard.

Continue reading Customizing The Music Studio Furniture & Hardware

Roland A-49 Keyboard And Propellerhead Reason

I’ve only owned two keyboards my entire time working with music; a Midiman Keystation 49 (8 years use) and an M-Audio Oxygen49 (6 years use). I end up using keyboards for years, so when I’m about to buy a new one, I research for one that’ll also last just as many years. After researching what felt like 100 keyboards, I decided on the Roland A-49.

Every current and discontinued keyboard was considered

I looked at what felt like almost 100 models of keyboards for consideration. I looked at every model from Akai, Alesis, Korg, M-Audio, Nektar, Novation and Samson to name a few. Every single keyboard controller from Sweetwater was considered. I also looked at models discontinued. Some of the top list of keyboards was the Akai Max49, with its sexy red color and even more impressive LED touch faders, the Nektar Panorama P4 for its dedication to being a universal controller for Reason and the Arturia KeyLab Essential 49 for its unique white on wood trim.

Continue reading Roland A-49 Keyboard And Propellerhead Reason

Studio Hardware Walkthrough

In this post, I detail the physical hardware I use for my desktop studio setup. Rack, mixer, music devices, audio interfaces, audio analyzers, monitors, speakers, power supplies and desktop configuration.

Rack

The rack is custom-built from two red IKEA tables. I stacked them and keep them in place with two “L” brackets. I then installed rack rails, cutting the metal rack rails with a dremel tool.

Continue reading Studio Hardware Walkthrough