A while ago, I had bought two Behringer BCF2000 mixers with the intention of using them as a 16 channel mixer. I found they wouldn’t “cascade” like they do in other DAW’s, contacted both Behringer and Propellerhead and they both said it couldn’t be done. I even looked into it, saw even the remote map file didn’t support it and wrote a blog post titled “Using Multiple BCF2000’s Can’t Be Done”. Miguel Catalão then left a comment on how it could be done and recorded a video just for this post.
This isn’t an easy method and I can’t personally vouch for it as I no longer have multiple BCF2000’s. The secret apparently lies in Miguel’s ability to figure out how to make the BCF2000’s act independently from one another instead of mirroring the same fader bank currently in focus.
Continue reading Reason: How To Use Multiple BCF2000’s →
Update: check out the new post Reason: How To Use Multiple BCF2000’s.
If anyone’s curious on setting up multiple Behringer BCF2000’s together in Propellerhead Reason (to go from 8 channel banks to 16 channel banks, etc)… from what I can tell it can’t be done and no one has provided real evidence of this. Because…
BCF2000’s are controlled by Reason uniquely
I couldn’t get Reason working with two Behringer BF2000’s, setting everything up as it’s intended (both via direct USB and MIDI cascading). When you look at the BCF2000 remote file, you see references for 8 faders groups at a time and no more. Reason loads in a temporary, on-the-fly preset for BCF2000 and BCR2000’s that other DAW’s don’t. This is where the issue happens. Who wants two or more BCF2000 mixers that are controlling the same exact channel banks? It’s stupid, and if you wanted a control surface, go with a BCR2000 instead of a BCF2000.
Continue reading Reason: Using Multiple BCF2000’s Can’t Be Done (Update) →
[05/10/2020 Version 1.5] I’ve created a way to fully control the entire Reason virtual SSL mixer and (most challenging), select and change mixer channels directly from only one BCR2000. I searched for months and found no one’s accomplished this. I’m sharing this specific method, along with a custom hardware profile (known as remotemap’s), and custom overlay graphics. I’ve also included some tweaks to the BCF2000 that add functionality.
Before creating this method, it wasn’t possible to control the individual channel settings of Propellerhead Reason’s virtual SSL mixer with a BCR2000. Before understanding how to do this, it’s important to understand why so many forum posts, videos and other information regarding Behringer BCR2000 and BCF2000’s are well-meaning but wrong when it comes to Reason. Instead of dumping files online and making people figure it out for themselves, I’m gonna’ explain this situation as no one else has.
Continue reading Reason: Using A BCR2000 To Fully Control The SSL Mixer’s EQ Channel Strip →
One thing putting together a physical mixer console has taught me is how capable Reason’s original virtual rack-mounted 14 stereo channel (28 mono channel) mixer, known as the reMIX Virtual Tec MX 28-4-14, was / is. The reMIX has since been replaced by the virtual SSL 9000k mixing console and it, of course, blows the reMIX out of the water in terms of functionality.
But one thing it taught was the power of using what you have wisely. The reason is because you were limited to 14 channels (even if you were using a mono source, such as a subtractor, you still wanted to apply FXs, EQ or panning from the reMIX, which made you use up an entire channel strip). Of course, you could chain multiple reMIXes together without taking up a channel slot (as well as passing on the 4 FX’s to each mixer). But it still taught you a valuable lesson of doing more with less.
Continue reading Reason: I Have A Lot Of Respect For The 14:2 Mixer (reMIX) →