I’ve held off sharing my impressions of the Mackie MCU Pro line of mixers because I didn’t wanna’ alienate anyone. Also because I wanted to be sure I had a solid understanding of the differences between the Mackie MCU Pro line and the Behringer X-Touch line (the X-Touch and X-Touch Extender exclusively). But after designing the remote maps needed to use both brands with Reason, I feel I would be letting people down by not discussing in detail why the Mackie MCU Pro line is inferior to the Behringer X-Touch line.
Getting the obvious outta’ the way
There’s some benefits of the Behringer X-Touch line over the Mackie MCU Pro line that aren’t really the focus of this article. So let’s briefly go over those benefits.
The X-Touch line (X-Touch and X-Touch Extender) has VU meters, is cheaper by nearly half ($449 vs. $1,099) and has better looks (once you take off the tacky, plastic sides). While those points help, the part that makes the Mackie MCU Pro line inferior is down to…
[10/07/2020 Version 4.1] Hey, I’m Jaëxx. This is the 100% free MJ Enhnaced Combo Extender 16 channel mixer interface for Reason Studios. (The MJ Enhanced Universal Control is the 8 channel version and the MJ X-Touch Trinity is the world’s first 24 channel version.) This is a remote map and Lua codecs that run on Mackie MCU Pro, Behringer X-Touch and iCon Qcon mixers (mixers that run off Mackie’s Universal Control protocol). I’ve created a custom Propellerhead Reason remote map for Mackie Universal Control + Extender (Combo, Extender Left) mixers, like the one used by my Behringer X-Touch + Extender mixers or the MCU Pro + XT Pro.
Using a base mixer (Mackie MCU Pro, Behringer X-Touch or iCon Qcon) and one extender mixer (Mackie XT Pro, X-Touch Extender or iCon Qcon Ex), the MJ Enhanced Combo Extender mixer interface in Reason Studios (regular and suite) allows you to connect two mixers in a single native remote map with no additional man-in-the-middle software to run. Every aspect of Reason’s virtual SSL 9000k mixer is fully controllable for all 16 channels. The MJ Enhanced Combo Extender controls Reason natively without messing with creating special sequencer tracks or tedious mouse clicking.
The MJ Enhanced Combo Extender map fixes a fatal flaw that would cause the mixer to stop working in Reason. It also fixes problems like buttons being mapped in the wrong areas, eliminates clip LEDs getting triggered on X-Touch’s, functions missing entirely (like the EQ Q knobs) while adding enhancements and new features, like comp and gate LED meters, redesigned encoder LED display modes, time displayed by default, global solo and mute off functions, FX send and return encoder LED meters, completely new “alternative text” mode for displaying additional information, illuminated select buttons, completely new “alternative text” mode for displaying additional information and added encoder ring master VU out meters. This remote map enables you to control the entire virtual SSL mixer and channel strip settings between two mixers as one fader-bank controllable 16 channel mixer.
This article also serves as a guide / general commentary.
[10/07/2020 Version 6.2] Hey, I’m Jaëxx. This is the 100% free MJ Enhanced Universal Control 8 channel mixer interface for Reason Studios. (The MJ Enhanced Combo Extender is the 16 channel version and the MJ X-Touch Trinity is the world’s first 24 channel version.) This is a remote map and Lua codecs that run on Mackie MCU Pro, Behringer X-Touch, iCon Qcon, PreSonus FaderPort 8 mixers (mixers that run off Mackie’s Universal Control protocol).
Using a Mackie MCU Pro, Behringer X-Touch, iCon Qcon, PreSonus FaderPort 8, the MJ Enhanced Universal Control mixer interface in Reason Studios (regular and suite) is a single native remote map with no additional man-in-the-middle software to run. Nearly all of Reason’s virtual SSL 9000k mixer is fully controllable for all 8 channels. The MJ Enhanced Universal Control controls Reason natively without messing with creating special sequencer tracks or tedious mouse clicking.
This fixes problems like buttons being mapped in the wrong areas, virtually completely eliminates clip LEDs getting triggered, functions missing entirely (like the EQ Q knobs) while adding enhancements and new features, like comp and gate LED meters, redesigned encoder LED display modes, time displayed by default, global solo and mute off functions, enhances the channel VU meters, introduces new rotary encoder LED display modes, FX return encoder LED meters, illuminated select buttons, completely new “alternative text” mode for displaying additional information and added encoder ring master VU out meters. This enables you to control the entire virtual SSL mixer and channel strip settings including channel selection. This article serves also as a guide / general commentary and I’m sharing it free…